Beginner electronics: Where Do I Start Learning Electronics?

Do you wish to start learning electronics and be able to come up with your devices and gadgets? Worry no more!

There are several ways you can use to start learning electronics. The only thing you need to do is know where to start, what you need, and the order of doing things.

I was once in the dark and messed up a lot. But after I knew the process of learning electronics, everything was just flowing smoothly.

I will be talking about simple steps you can use to learn electronics.

The steps you need to follow include:

Learning closed loops
Grasp the basics in current, resistance and voltage
Building electric circuits from diagrams
Understanding the basics of other components
Learn to use transistors as switch
Learning soldering

Quick Navigation show

Steps of learning electronics

When you follow the below steps, you will be at the forefront of learning electronics.

Step 1. Learning closed loops

It is hard to build a circuit if you have no idea what is required to work.
Therefore, you need to learn the first and most important thing: a closed-loop.

It is very important to make a working circuit.
After learning the closed-loop, you will be able to make a simple working circuit.
Also, you will be able to correct any common mistake in any circuit, like a missing connection.

Step 2. Grasp the basics in current, resistance, and voltage

Start by noting that resistance resists, current flow, and voltage push, and they have an effect on each other. This is very important to know when you are a beginner in electronics.

You will be through this step if you learn how the 3 work in a circuit. You don’t have to dive too deep into laws like Ohm’s law since you can learn it later.

After you are through with this step, you can look at a circuit and know how the voltage is affecting and divided into different components and how current flows.

Step 3. Building electric circuits from diagrams

By now, you will be ready to start building circuits. Building circuits is fun, and at the same time, you will be good at it if you repeatedly do it.

For example, you need to practice how to cook to be the best at it, similar to electronics.

Therefore, in the end, you must know how to use any breadboard and the working principle of a circuit diagram. You can always get free circuit diagrams online and be in a position to create one.

Step 4. Understanding the basics of other components

You should understand how common components in electronic work.
Learn how these components work:

The LED
The resistor
The transistor
The capacitor

You only need to have the right learning material to learn the concept of the above components. Note that there are many learning materials out there.
Therefore, get the right material, I insist.

At the end of this step, you will be able to know the purpose of having each component in the circuit and how they all work.

Step 5. Learn to use transistors as switch

The transistor is one of the components that stands on its own and is very important in electronics. You need to know how it works before you start using it.

Since you will now know what a transistor is and how it works, it is time to use it differently. Build circuits and use the transistor as a switch.

After finishing this step, you will be able to understand and control things like buzzers, lights, and motors with transistors.
Also, you should know how to sense light or temperature using transistors.

Step 6. Learning soldering

It is easy to build prototypes on a breadboard.
However, the connections can easily fall out, especially when moving from place to place.

If you want to have a nice-looking gadget and last long, learn how to solder.
Soldering is the easiest process in electronics and fun to learn.

Because of that, you will be able to make a perfect solder joint.
Soldered gadgets look good and last long.